https://johndeeresigns.com Mon, 04 May 2026 02:10:03 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://johndeeresigns.com/dealer-advertising-sign-panel-new-john-deere-moline-ill-embossed-original/ https://johndeeresigns.com/dealer-advertising-sign-panel-new-john-deere-moline-ill-embossed-original/#comments Wed, 25 Mar 2026 07:46:52 +0000 https://johndeeresigns.com/dealer-advertising-sign-panel-new-john-deere-moline-ill-embossed-original/



















Up for availability is the old original advertising sign. Please see all photos for condition – condition is as shown. This is a John Deere advertising dealership sign panel. The tapered shape suggests it may have been part of a. Multi-panel dealership fascia sign, not just a simple hanging board. Some Deere dealers had three panel triangular projecting signs in the 1940s. It is believed this is one panel from a three panel sign set. Soon after that the “Moline-ILL” was dropped from signs and manufactured. With metal that was not as heavy grade. The sign is 45-1/4″ across at the top and 36-1/2″ at the bottom. It has a 1-1/8 top rolled edge. It is 21 high. Weighs 12.8 pounds. The geometry is classic wind-resistant hanging signage. The panel is wider at the top than the bottom creating a trapezoid. The shape reduces wind loading on projecting street signs. The shape design allows for flex slightly in the wind instead. Of acting like a rigid sail. On the rear is a large triangular. This reinforcement style is typical of structured. Signage panels meant to resist wind. The rolled over top edge was designed to slide over or hang. From a round rod or square bar frame. Graphics contain a leaping deere logo with serif lettering. The lettering and logo are embossed. There are two shallow scallop like indentations. Stamped into the lower flange. These are clearance stamps. Used in fabrication so the panel could sit into a steel frame. There is rust on top with bird excrement. This listing is minus the metal original frame. And any other sections of the sign. There is a mounting bracket on the upper left side with an. This not threaded because it was likely. For a pin or rod, not a bolt. This was to allow the sign to hang. From a crossbar or frame. The paint appears to be good and orignal. Please see photos for condition – condition is as shown.

]]> https://johndeeresigns.com/dealer-advertising-sign-panel-new-john-deere-moline-ill-embossed-original/feed/ 0 https://johndeeresigns.com/new-john-deere-moline-ill-cast-tin-metal-panel-moline-illinois/ https://johndeeresigns.com/new-john-deere-moline-ill-cast-tin-metal-panel-moline-illinois/#comments Thu, 19 Feb 2026 07:06:48 +0000 https://johndeeresigns.com/new-john-deere-moline-ill-cast-tin-metal-panel-moline-illinois/










Rustic small hole in center. Has a deer in center. Look at the pictures as a reference and ask any questions thanks.

]]> https://johndeeresigns.com/new-john-deere-moline-ill-cast-tin-metal-panel-moline-illinois/feed/ 0 https://johndeeresigns.com/vintage-26x17-john-deere-farm-equipment-panel-homemade-advertising-sign/ https://johndeeresigns.com/vintage-26x17-john-deere-farm-equipment-panel-homemade-advertising-sign/#comments Sun, 25 Feb 2024 07:14:07 +0000 https://johndeeresigns.com/vintage-26x17-john-deere-farm-equipment-panel-homemade-advertising-sign/
















Nice solid vintage shape. Shows normal wear and age. Has some scratches and scuffs. A little rough around the edges where it was torched off whatever it came off of. Should clean up nicely with a little effort. Would look great in a frame. Displays fine as it is. Measures roughly 26″x17.5″. See pictures to make your own determination on physical condition.

]]> https://johndeeresigns.com/vintage-26x17-john-deere-farm-equipment-panel-homemade-advertising-sign/feed/ 0 https://johndeeresigns.com/discussion-panel-getting-the-most-value-out-of-your-farm/ https://johndeeresigns.com/discussion-panel-getting-the-most-value-out-of-your-farm/#comments Tue, 19 Jan 2021 16:56:37 +0000 http://johndeeresigns.com/discussion-panel-getting-the-most-value-out-of-your-farm/ ]]> https://johndeeresigns.com/discussion-panel-getting-the-most-value-out-of-your-farm/feed/ 0